Flex 310 M HT 200 is a high temperature resistant grade of elastic adhesive designed specifically for bonding parts that will be subjected to elevated thermal stress. This one part adhesive is manufactured from a MS polymer base and bonds well to most materials. Once fully cured, parts bonded with Weicon Flex 310 M HT 200 can be powder coated. Typical Characteristics Density 1.41 g/cm³ Viscosity Pasty Colour Grey Stability (ASTM D 2202) <1mm Processing Temperature 5ºC to 35ºC Cure Type Humidity Curing Conditions 5ºC to 40ºC 30% to 95% rel. humidity Skin Over Time 10 min. Cure Speed (first 24hrs) 3-4mm Overpaintable Wet in Wet Within 3hrs of application Long-Term Temperature Resistance -40ºC to 90ºC Short-Term (45 min.) Temperature Resistance 180ºC Short-Term (30 min.) Temperature Resistance 200ºC Thermal Coating / Powder Coating After Complete Cure Building Material Category DIN 4102 B 2  Available Sizes Weicon Flex 310 M HT 200 is available from Associated Gaskets in 310ml cartridges. These can be dispensed using standard cartridge guns. Surface Preparation Before applying Flex 310 M HT 200 it is critical to ensure that the surfaces being bonded are clean and grease-free. Many surface contaminants (such as oil, dust and dirt) can be removed with Weicon Surface Cleaner. For heavily soiled surfaces Weicon Cleaner S may be more suitable. If paint or adhesive residues must be removed, Weicon Sealant and Adhesive Remover Spray is likely an option. For more information on surface preparation or working with this high quality elastic adhesive, please consult the relevant TDS and SDS which can be obtained by contacting your local Associated Gaskets branch. Adhesive Finder Tool Unsure if this adhesive is suitable for your application? Try Weicon’s handy Adhesive Finder tool! Additional Information and Resources Weicon Flex 310 M HT 200 Info Sheet Weicon Flex 310 M HT 200 TDS Weicon Flex 310 M HT 200 Adhesive Sealant SDS Weicon Flex 310 M HT 200 High Temperature Powder Sealant Product Video
