600W DC-DC 10-60V to 12-80V 10A Step-up Boost Converter

The 600W DC-DC 10-60V to 12-80V 10A Step-up Boost Converter is robust, versatile module which includes a large heatsink for bigger loads. The 600W step-up module allows you to adjust the voltage output based on the device’s needs. This step-up voltage converter module can stabilize the solar panel voltage and is a good choice to use while charging batteries. The voltage step-up module adopts over-current, protection, and other protections which makes the step-up module safe and reliable to use.Specifications:Input voltage: 10V-60VInput Current: Maximum input current 15AOutput voltage: 12V-80V continuously adjustableOutput current: maximum output current of 10A (adjustable)Output power: effective power P = input voltage V * 10AConversion efficiency: up to 95% (input voltage and current; conversion efficiency of the output voltage, current impact)Short-circuit protection: fuseInstallation size: 73 * 51mmMechanics:Products chronological materialsCustom radiator Specifications: Radiator floor thickness 5mm, tooth height 21mm, length 85mm, width 63mmModule fixed above the radiator, radiator and boost board are integrated design, this is very user-friendly to allow direct useOnly need to use long screws to amount in your system.Electronics:Inductor magnetic ring use bead of 27mm Sendust, 1mm double wire wound inductors, high-quality filter capacitor, input a 1000uF63V electrolytic capacitors, and output two 470uF100V electrolytic capacitorsOn-board power supply switch, power indicator, voltage regulation, current adjustment potentiometer so that the output is more convenientYou can always adjust the output voltage, the current size of the input and output using 8500 terminals, through the current ability to ensure a long time reliable.Applications:DIY an output adjustable vehicle power supply, only need 12V power input access, output voltage (14V-80V) free and continuous adjustment of the output voltage can not be lower than the input voltage.Universal car laptop power supply. 12V power input connected to the output regulation voltage notebook need to work.Boost charger, 12V power higher than 12V battery charging, for example, for 24V battery, and charging current can be adjusted.Powered electronic equipment, as long as the voltage is adjusted to the desired voltage and current does not exceed the rated current can work properly.System level power supply before, when design a project, input is 10V-18V, but system board needs about 24V of power and a great power, general DC-DC module power is too small, then the module will be your most good choice, no need to debug and work directly on the machine, easily enable high-efficiency high-power boost.Datasheet: https://w2.electrodragon.com/Board-dat/OPM/OPMS022-dat/OPMS022-dat.md